Skip to main content
Compliance

CMMC Certification Cost: Level 1 to Level 3, From DoD's Own Estimates

CMMC certification cost by level, from the DoD final rule's own estimates for self-assessment, C3PAO and Level 3, and how an MSP scopes it for a client.

G
GetCybr Insights
··11 min read
MSP adviser reviewing CMMC Level 1, Level 2 and Level 3 assessment cost estimates for a defence contractor client

Key Takeaways

What CMMC assessment costs, from the primary source: the Regulatory Impact Analysis in the Department of Defense final rule (32 CFR Part 170, 89 FR 83092, 15 October 2024). The rule's per-entity estimates for Level 1 and Level 2 self-assessment, Level 2 C3PAO certification and Level 3, what they exclude, why C3PAO pricing is set by the market, and how an MSP scopes and prices CMMC readiness for a defence-supply-chain client. These are DoD estimates, not quotes. Sources read on 21 November 2026.

CMMC has a rare thing for a compliance cost question: an official estimate. When the Department of Defense published the CMMC final rule in the Federal Register, its Regulatory Impact Analysis put a dollar figure on each assessment type. Those figures are estimates made by DoD for a rule-making, not prices, and they leave out some of the work. This guide sets out exactly what the rule says, as read on 21 November 2026, what it excludes, and how an MSP can scope and price CMMC work for a client without treating an estimate as a quote.

The source is 89 FR 83092, Federal Register document 2024-22905, the final rule adding 32 CFR Part 170, published on 15 October 2024. Every dollar figure below comes from that document’s Regulatory Impact Analysis, section “Cost Analysis/Estimates by CMMC Level”. The rule states its 20-year totals in 2023 dollars, and we did not find a dollar year printed beside each per-entity figure, so read them as DoD estimates from the time of the rule.

What you are paying for

CMMC cost splits into parts that different parties set.

  • The assessment itself. Level 1 and Level 2 (self) are assessments the contractor performs and reports. Level 2 (C3PAO) is performed by a CMMC Third-Party Assessment Organization. Level 3 is performed by DCMA DIBCAC. The Federal Register rule’s Table 1 sets out who assesses at each level and how often.
  • Affirmation. After each assessment, and annually after that, an affirmation of compliance is entered in SPRS, according to the rule’s Table 1. The rule costs this separately.
  • The work of meeting the requirements. Putting NIST SP 800-171 R2 controls in place for Level 2, or the selected NIST SP 800-172 requirements for Level 3. For Levels 1 and 2 the rule does not estimate this. It says its estimates “are based only on the assessment, certification, and affirmation activities that a defense contractor, subcontractor, or ecosystem member must take to allow DoD to verify implementation of the relevant underlying security requirements”, per the Federal Register.
  • The C3PAO’s fee. The rule says “Market forces of supply and demand will determine C3PAO pricing for CMMC Level 2 certification assessments”, so the C3PAO quote is its own number, not DoD’s.

What each level requires

The level definitions are in 32 CFR 170.14. Level 1 uses the 15 basic safeguarding requirements of 48 CFR 52.204-21. Level 2 uses the requirements of NIST SP 800-171 R2, which are identical to the CMMC Level 2 requirements. Level 3 uses selected requirements from NIST SP 800-172, with 24 selected according to the rule’s Table 1. For the requirement-by-requirement view, see the NIST SP 800-171 framework page; for how GetCybr describes delivering it, see the CMMC page.

What it costs, component by component

These are DoD’s estimates, not quotes. Each is the per-entity figure for the first assessment and affirmation as stated in the rule; “three-year” is the rule’s figure for the triennial assessment plus two further annual affirmations, where the rule gives one. “Other than small” and “small” are the rule’s two entity classes.

Component Who sets the price Typical driver Source
Level 1 self-assessment and affirmation (annual) The contractor performs it; DoD’s figure is an estimate Time to plan, assess, report in SPRS and affirm; 15 requirements DoD estimate: $4,042 other than small entity, $5,977 small entity (the small-entity estimate includes external service provider hours), per Federal Register
Level 2 self-assessment and affirmation The contractor performs it; DoD’s figure is an estimate Planning, assessment and reporting hours against 110 NIST SP 800-171 R2 requirements DoD estimate: $43,403 other than small entity (three-year $48,827); $34,277 small entity (three-year $37,196), per Federal Register
Level 2 C3PAO certification assessment and affirmation The C3PAO, at market prices; DoD’s figure is an estimate Preparation, the C3PAO assessment in three phases, and reporting DoD estimate: $112,345 other than small entity (three-year $117,768); $101,752 small entity (three-year $104,670), per Federal Register
Level 3 certification assessment and affirmation DCMA DIBCAC assesses; the contractor bears preparation and implementation Needs a final Level 2 C3PAO status first; NIST SP 800-172 selected requirements DoD estimate: assessment and affirmation $39,021 other than small entity (three-year $44,445) and $9,050 small entity (three-year $12,802), per Federal Register
Level 3 engineering costs The contractor Implementing and maintaining the selected NIST SP 800-172 requirements The rule lists nonrecurring and recurring engineering costs of $21,100,000 and $4,120,000 per other than small entity, and $2,700,000 and $490,000 for a small entity, per Federal Register
Implementing Level 1 and Level 2 requirements The contractor, you or a consultant State of the client’s environment Not estimated for Levels 1 and 2: the rule bases those estimates only on assessment, certification and affirmation activity, per Federal Register
C3PAO price quote The C3PAO Scope, environment size and the assessor’s market No DoD price. The rule says market forces will determine C3PAO pricing, per Federal Register

The rule says the total cost of a Level 3 certification assessment “includes the cost of a Level 2 certification assessment as well as the costs to implement and assess the security requirements specific to Level 3”, so the Level 3 line is additional to a Level 2 line, not a replacement for it. It also says CMMC Level 3 “is expected to affect a small subset of the DIB”. The Level 3 engineering figures are the rule’s own and appear large; they are quoted as stated and should not be read as a quote for any client.

Delivering this for a client as an MSP: how to scope and price it

This section is practitioner guidance, not a published rate. It gives a method; the numbers have to be yours.

  1. Find the level first. The level comes from the client’s contracts, not from your preference. Ask which level each contract requires and whether it is a self-assessment or a C3PAO assessment. Level 1 and Level 2 (self) carry no assessor fee; Level 2 (C3PAO) does.
  2. Scope the environment before you quote. For Level 2, scope is the boundary where Controlled Unclassified Information is processed, stored or transmitted, and the assets in it. Draw that boundary first; a smaller scoped environment is a smaller job. Read NIST SP 800-171 against it to see where the gaps are.
  3. Price readiness in hours. Estimate hours per control family for this client’s estate, multiply by your own cost per delivery hour, and add the margin you need. The vCISO cost guide has a worked method for turning hours and margin into a fee. The DoD figures are for scale only: they are not your rate and not your client’s quote.
  4. Treat the C3PAO as the client’s purchase. Ask two or three C3PAOs to quote the same scope in writing, and show the fee as its own line. The rule does not set it.
  5. Check how you appear in the client’s scope. The rule has requirements for contractors that use an external service provider. If you manage the client’s systems, read 32 CFR 170.19 with the client’s scope and say in the written proposal what you are in scope for. Our CMMC 2.0 service-line guide covers building the service itself.
  6. Put assumptions in a written quote. State the level, the scope boundary, what is excluded, who pays for remediation tooling, and the affirmation each year after the assessment. Check current phase-in dates in the DFARS acquisition rule before you tell a client when a requirement reaches their contracts.

If software helps you deliver the work, its cost per client belongs in your cost base. See GetCybr pricing for current prices; this guide does not restate them.

Where GetCybr fits

GetCybr publishes this guide, so weigh this section accordingly. GetCybr is multi-client GRC software for MSPs, consultancies and vCISO practices. Its CMMC page describes gap analysis against Levels 1 to 3, mapping to the 110 NIST SP 800-171 Rev 2 requirements with evidence linked per requirement, SPRS score calculation and monitoring, CUI scope management, plan of action and milestones tracking, and C3PAO audit preparation, so the work in the table above can be tracked per client.

GetCybr’s AI interview asks the assessment questions and drafts control maturity, and nothing is saved until your reviewer applies it. A built-in vCISO assistant answers questions about each client and proposes actions. Nothing runs until you confirm.

GetCybr does not certify anyone and is not a C3PAO. A Level 2 certification comes from a C3PAO and a Level 3 assessment from DCMA DIBCAC, and GetCybr does not change what an assessor charges, which is why no GetCybr price appears in the table.

Frequently asked questions

How much does CMMC certification cost?

There is no single price. In the Regulatory Impact Analysis of its final rule (89 FR 83092, read on 21 November 2026), the Department of Defense estimates per entity for assessment and affirmation: $4,042 (other than small entity) or $5,977 (small entity) for Level 1; $43,403 or $34,277 for a Level 2 self-assessment; and $112,345 or $101,752 for a Level 2 C3PAO certification. These are DoD estimates, not quotes.

What does the DoD estimate for a Level 2 C3PAO assessment?

As read in the Federal Register final rule on 21 November 2026: $112,345 for an other than small entity (three-year cost $117,768) and $101,752 for a small entity (three-year cost $104,670). The three-year figures include the triennial assessment and two further annual affirmations. The rule also says market forces of supply and demand will determine C3PAO pricing, so a quote can differ.

Do the DoD estimates include the cost of fixing gaps?

Not for Levels 1 and 2. The Federal Register rule says its Level 1 and Level 2 estimates are based only on the assessment, certification and affirmation activities, not on implementing the underlying security requirements. For Level 3 it does include implementation estimates, which it lists separately as engineering costs.

What do the three CMMC levels require?

Per 32 CFR 170.14 on eCFR, read 21 November 2026: Level 1 uses the 15 basic safeguarding requirements in 48 CFR 52.204-21, Level 2 uses the NIST SP 800-171 R2 requirements, and Level 3 uses selected requirements from NIST SP 800-172. A Level 3 assessment first needs a final Level 2 C3PAO status.

Is Level 1 free?

No. Level 1 is a self-assessment, so there is no assessor fee, but the Federal Register rule (read on 21 November 2026) still estimates $4,042 for an other than small entity and $5,977 for a small entity, from the time to plan, assess, report in SPRS and affirm. The small-entity estimate includes hours from an external service provider.

How should an MSP quote CMMC work for a client?

Separate three things: the client’s own and your readiness hours, the C3PAO’s fee from a written quote, and any remediation tooling. Use the DoD figures only as a sense of scale, labelled as estimates, and never as a quote. Price your hours at your own cost per delivery hour.

Sources

Read on 21 November 2026. Figures and quotations in this guide are taken from these pages.

DoD’s estimates are for the rule-making, not for any individual contractor, so ask for written quotes before you budget.

Next step

If you run compliance services across many MSP clients, you can become a partner.

Run compliance and vCISO work for every client

MSPs: put the repeatable assessment, roadmap, and reporting work on GetCybr while your team stays in control of every client relationship.